DESCRIPTION

Rhino Linings Corporation offers 1:1 and proprietary 2:1 plural component spray equipment. Our proportioning units can spray a variety of applications from insulation to small containment chemical protection.

R-908SC-HT – High Temp. Face Coat

Rhino R-908SC-HT (black) high temperature face coat is a Bis-F Novolac, high functionality epoxy resin. Designed for ambient cures and high temperature applications.

R-908SC-HT – High Temp. Face Coat

1301.5301-TN5 – Standard Undiluted

Standard undiluted Bis-A formulation for general use. High viscosity, clear, rigid resin with low toxicity and odor. No solvents, 100% solids, DOT non-regulated.

1301.5301-TN5 – Standard Undiluted

1301AR – Enhanced Air Release

Standard undiluted Bis-A formulation for general use. High viscosity, clear, rigid resin with low toxicity and odor. No solvents, 100% solids, DOT non-regulated.

1301AR – Enhanced Air Release

1301T-R1 – Thixotropic, Black

Standard viscosity, undiluted, black pigmented epoxy with excellent physical properties. Fast wetting of reinforcement materials. Use Rhino™ 1301T-R1 where resistance to cracking and increased impact resistance is desirable. 100% solids, highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.

1301T-R1 – Thixotropic, Black

R-1301 Standard Undiluted Resin

Standard undiluted Bis-A formulation for general use. High viscosity, clear, rigid resin with low toxicity and odor. No solvents, 100% solids, DOT non-regulated.

R-1301 Standard Undiluted Resin

R-1301S – Extended Pot Life

Undiluted epoxy resin, based on Bis-A offering a longer pot life than standard resin types. Lower viscosity than standard resin. Low toxicity and odor. Specially designed for applications where additional pot life is useful. 100% solids, very clear DOT non-regulated.

R-1301S – Extended Pot Life

1302 Epoxy Resin

Medium viscosity, toughened, undiluted, epoxy resin with enhanced air release characteristics, and physical properties. Fast wetting of reinforcement materials. Use Rhino™ 1302 where resistance to cracking and increased impact resistance is desirable. 100% solids epoxy, No VOCs and DOT non-regulated.
1302 Epoxy Resin

1302-R1 Epoxy Resin

Medium viscosity, undiluted, epoxy resin with enhanced air release characteristics, and physical properties. Fast wetting of reinforcement materials. Use Rhino™ 1302-R1 where resistance to cracking and increased impact resistance is desirable. 100% solids epoxy, No VOCs and DOT non-regulated.
1302-R1 Epoxy Resin

1303 – Medium Viscosity

Rigid epoxy resin, based on Bis-A. Medium viscosity diluted resin with low toxicity and odor for increased build or for tropical environments. 100% solids, no VOCs, DOT non-regulated.

1303 – Medium Viscosity

1304T – Thixotropic Medium Viscosity Resin

Medium viscosity and thixotropic resin for reduced drainage in vertical applications or in laminates. Rigid Bis-A based epoxy with the lowest toxicity of any epoxy resin. Modified for improved air release and reinforcement wetting. 100% solids, DOT non-regulated.
1304T – Thixotropic Medium Viscosity Resin

1306T – Thixotropic Low Viscosity

Low viscosity and thixotropic resin for reduced drainage in vertical applications or in laminates. Rigid epoxy based on Bis-A having the lowest toxicity of any epoxy resin. Modified for improved air release and reinforcement wetting. 100% solids, DOT non-regulated.

1306T – Thixotropic Low Viscosity

1307-LV – For Kit Aircraft

High performance, low viscosity multifunctional epoxy resin containing minimal reactive diluent content for maximum property retention. Reduced viscosity allows for faster and easier wetting of reinforcement materials. 100% solids, no VOCs, very clear, highly resistant to crystallization, low odor and skin toxicity, and DOT non-regulated.

1307-LV – For Kit Aircraft

1308 NC – Low Viscosity GP Resin

Low viscosity, economical, general purpose epoxy resin with lowest toxicity and odor of any epoxy resin type. Viscosity similar to laminating polyesters allowing fast and efficient wetting of reinforcement materials. Higher physicals than competitive resins due to lower reactive diluent content. 100% solids, non-crystallizing. Zero VOCs.

1308 NC – Low Viscosity GP Resin

1310L-6 – Laminating and Tooling

Medium viscosity, rigid epoxy resin with excellent physical properties. Fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.
1310L-6 – Laminating and Tooling

1310T Gray – Thixotropic Resin

Medium viscosity, thixotropic, rigid epoxy resin with excellent physical properties. Fast wetting of reinforcement materials. Use 1310T where resistance to draining or run-off is desirable. Pigment will not separate from the system on storage. 100% solids, highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.

1310T Gray – Thixotropic Resin

1310T-NC – Thixotropic Resin

Medium viscosity, thixotropic, rigid epoxy resin with excellent physical properties. Fast wetting of reinforcement materials. Use 1310T-NC where resistance to draining or run-off is desirable. 100% solids, non-crystallizing. No VOCs and DOT non-regulated.

1310T-NC – Thixotropic Resin

1311 – Intermediate Viscosity

Rigid epoxy resin, based on Bis-A. Viscosity intermediate between Rhino 1308 and 1303 for medium build and fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.

1311 – Intermediate Viscosity

1314 – Low Viscosity Laminating

Low viscosity, faster curing epoxy resin with excellent physical properties. Very fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization. Zero VOCs.
1314 – Low Viscosity Laminating

1314-4 – Toughened Low Viscosity

Low viscosity, Toughened, faster curing epoxy resin with excellent physical properties. Very fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization. Zero VOCs.

1314-4 – Toughened Low Viscosity

1315 – Low Viscosity

Rigid epoxy resin, based on Bis-A with butyl glycidyl ether. Low viscosity for fast wetting of reinforcement materials with no compromise of HDT. 100% solids, clear, with excellent chemical and corrosion resistance. No VOCs and DOT non-regulated.

1315 – Low Viscosity

1315-R1 – Low Viscosity Epoxy Resin

Rigid epoxy resin, based on Bis-A with butyl glycidyl ether. Low viscosity for fast wetting of reinforcement materials with no compromise of HDT. 100% solids, clear, with excellent chemical and corrosion resistance. No VOCs and DOT non-regulated.

1315-R1 – Low Viscosity Epoxy Resin

1315-R2 – Low Viscosity Epoxy Resin

Rigid epoxy resin, based on Bis-A with cresyl glycidyl ether. Low viscosity for fast wetting of reinforcement materials with no compromise of HDT. 100% solids, clear, with excellent chemical and corrosion resistance. No VOCs and DOT non-regulated.
1315-R2 – Low Viscosity Epoxy Resin

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603