DESCRIPTION
Standard viscosity, undiluted, black pigmented epoxy with excellent physical properties. Fast wetting of reinforcement materials. Use Rhino™ 1301T-R1 where resistance to cracking and increased impact resistance is desirable. 100% solids, highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.
SUGGESTED USES
Filament winding, press molding and other wet lay-up applications where a non-draining, black pigmented epoxy resin is required.
Viscosity: | 9,500 – 11,000 cps |
EEW: | 188 – 195 |
Color: | Black Liquid |
Weight/Gal: | 9.6 – 9.7 lbs |
Recommend Rhino 1301T-R1 used at slightly elevated temperature 70°– 95°F (product use temperature). Storage below 45°F is not recommended due to potential crystallization of the product (requiring re-heating to restore original viscosity). All standard epoxy curing agents are compatible with Rhino 1301T-R1 proportion resin and hardener in accordance with the selected hardener system’s recommended mix ratio. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no more material than may be applied before the expiration of the pot life.