DESCRIPTION

Low viscosity, Toughened, faster curing epoxy resin with excellent physical properties. Very fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization. Zero VOCs.

SUGGESTED USES

Marine laminating, adhesives, RTM, vacuum bagging, casting, fairing compounds, penetrating sealers. Rhino 1314-4 has very good impact resistance in most applications.
Viscosity: 400 – 500
EEW: 189 – 206
Color: 1 (Gardner)
Weight/Gal: 9.30 lbs
Recommend Rhino 1314-4 be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1314-4 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
Rhino 1314-4 cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
 
9lb Gallons, 45lb Pails and 500lb Drums. FOB San Diego, CA.
 
0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

CREATING ART WITH RHINO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603