DESCRIPTION

Standard undiluted Bis-A formulation for general use. High viscosity, clear, rigid resin with low toxicity and odor. No solvents, 100% solids, DOT non-regulated.

SUGGESTED USES

Filament winding, hand lay up laminating, vacuum bagging, tooling and pattern work, castings, adhesives, surface coatings and chemically resistant flooring.

Viscosity: 11,000 – 13,000 cps
Weight/gal: 9.7 – 9.8 lbs
EEW: 188
Color: 1+ (Gardner)
Competitive Offsets: Ciba Geigy GY 6010, Dow 331, Shell 828

Use and store between 65°– 80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino Hardeners are compatible with Rhino 1301AR and should be proportioned in accordance with the selected Rhino Hardener mix ratio. Use of 1301AR resin in RTM or filament winding processes require specialized hardener(s) and equipment. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no more material than can be applied before the expiration of the pot life.

Rhino 1301AR curing is determined by the selected Rhino™ hardener, see the hardener technical data sheet.
Rhino R-908SC-HT w/ Rhino 3102 w/ Rhino 3136-R1 w/ Rhino 3137
Mix Ratio, PHR, (WT): 100:12 100:20 100:12
Gel Time, Minutes, 77°F: 15 30 40
Thin Film Set Time, Hrs, 77°F: 2 2.5 4
Cure Temperatures, °F: 77/130/180/225 77/130/180/225/285 77/130/180/225/275/325
HDT F, Ambient Cure: 175 195
HDT F, Post-cure: 225 280 350
9lb Gallons, 45lb Pails, and 500lb Drums. FOB San Diego, CA.
0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603