DESCRIPTION

Medium viscosity and thixotropic resin for reduced drainage in vertical applications or in laminates. Rigid Bis-A based epoxy with the lowest toxicity of any epoxy resin. Modified for improved air release and reinforcement wetting. 100% solids, DOT non-regulated.

SUGGESTED USES

Hand lay up laminating, tooling and pattern work, adhesives and surface coatings.
Viscosity:2,700 – 3,300 cps
Weight/Gal:9.5 lbs
EEW:190 – 196
Color:Milky White Translucent Liquid
Use and store between 65° – 80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Rhino sales personnel for recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Wax or “release” mold surfaces before epoxy application. All Rhino curing agents are compatible with Rhino 1304T so proportion resin per the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the mixing container bottom and sides. Mix no more material than may be applied before pot life expiration.
Rhino 1304T cures overnight at typical ambient temperatures (65°- 80°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
45lb Pails and 500lb Drums (Minimum order 450lbs). FOB San Diego, CA.
0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603