DESCRIPTION
Low viscosity, flexible epoxy resin modified for added adhesion properties and flexibility of up to 50% elongation. Quickly wets reinforcement materials. 100% solids, highly resistant to crystallization in cold environments. Light amber color. No VOCs and DOT non-regulated.
SUGGESTED USES
| Viscosity: | 950 – 1,200 cps |
| EEW: | 280 – 290 |
| Color: | Clear liquid |
| Weight/Gal: | 9.2 lbs |
Recommend Rhino 1382 be used between 55° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1382 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
