DESCRIPTION
High performance, low viscosity epoxy resin containing proprietary reactive diluent for maximum property retention. Contains surfactants for minimal surface imperfections. 100% solids, no VOCs, very clear, highly resistant to crystallization, low odor and skin toxicity, DOT non-regulated.
SUGGESTED USES
Viscosity: | 1,000 – 1,300 cps |
Weight/Gal: | 9.3 lbs |
EEW: | 189 – 195 |
Color: | Clear, slightly translucent liquid |
Recommend Rhino 1367-L16 be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1367-L16 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.