DESCRIPTION

Premium quality, 100% solids epoxy resin binder specifically designed for use as a high strength general purpose repair compound, binder and adhesive for concrete. Contains no solvents (zero VOC) or carcinogens and has minimal odor to assure low toxicity and ease of application. The non-sag consistency of the material helps provide an exceptional bond to concrete surfaces. The cured Non-Sag Epoxy develops high compressive and flexural strength for optimum performance.

SUGGESTED USES

  • Concrete repairs and resurfacing
  • Sealer “cap” for crack injection applications
  • Back-fill and waterproofing of holes and other repair areas
  • May be used to bond wood, steel, and other dissimilar products to concrete substrate
  • Permanent potting compound for setting dowels, flanges and other fitting into concrete
Solids By Volume:100%
Volitale Organic Content (VOC):0 lbs/gal
Mixing Ratio:1:1 by volume
Viscosity:Non-sag paste
Pot Life:45-60 min at 77°F
Application Temperature:40°F minimum, 100°F max
Maximum Re-Coat Time at 77°F:24 hours
Dry To Touch at 77°F:4-6 hours
Light Trafic at 77°F:10-12 hours
Full Cure at 77°F:7 Days

Complies with ACI Standard 503.1 – 4 and ASTM C-881-90 Type I, II, IV, V, VI and VII. Grade 4, Class B,C,D,E and F. Cures in presence of moisture and humidity. Resin non-crystallizing.

PropertyResultTest Method
Compressive Strength (psi):10,000-11,000ASTM D-695
Flexural Strength (psi):9,000 – 10,800ASTM D-790
Tensile Strength (psi):6,000-7,000ASTM D-638
Tensile Elongation (%):4.0ASTM D-638
HDT (F) ASTM:140ASTM D-648-264
Bond Strength (psi) to concrete:>300, w/ 100% concrete failure
Water Absorption (% gain), 24 hrs:< 1
Shore D Hardness:82
FOB San Diego, CA. Non-Sag Epoxy: 2-Gallon, 10-Gallon and 100-Gallon Kits.
0%
SOLIDS BY VOLUME
0
MAX RE-COAT TIME AT 77°F (HRS)
0
DRY TO TOUCH AT 77°F (HRS)
0
LIGHT TRAFFIC AT 77°F (HRS)

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603