DESCRIPTION

Medium viscosity epoxy resin with excellent physical properties. Fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.

SUGGESTED USES

Lay up laminating, vacuum bagging, tooling and pattern work.
Viscosity:950 – 1,200 cps
EEW:190 – 194
Color:2 (Gardner)
Weight/Gal:9.4 lbs

Recommend Rhino 1379 be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection. Consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1379 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.

Rhino 1379 cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
500lb drums, 2,500lb IBC’s and bulk tanker. FOB Rhino Linings Corporation, San Diego, CA.
0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603