DESCRIPTION

White, highly thixotropic rigid epoxy resin with excellent physical properties. Very high resin viscosity for high build applications or repairs. Holds heavy tooling fabrics in place during cure. 100% solids, highly resistant to crystallization, Zero VOCs and DOT non-regulated.

SUGGESTED USES

Overhead work, general purpose repairs, adhesives and “coving” applications (with 3146 GEL hardener). Used where a white color is desired.

Viscosity: Highly Thixotropic Paste
EEW: 189 – 192
Color: White
Weight/Gal: 9.7 – 8.8 lbs

Recommend Rhino 1346 Gel be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1346 Gel so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.

Rhino 1346 GEL cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.

45lb Pails only (net weights). FOB San Diego, CA.

my picture1346 – White, Thixotropic Gel Resin Data Sheet
0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603