DESCRIPTION

PipeLiner 5000 11-70 PW is a two-component, 1:1 ratio, rapid curing, elastomeric structural lining systems developed for high build applications of 30 – 500 mil cross sections. Pipeliner 5000 can be sprayed in low temperatures, extremely humid conditions and at 350-400 mils thick, or almost 3/8 of an inch, in a single pass without stress cracking.

Pipeliner 5000 has passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 potable water standard and is Truesdail Laboratories listed. The polyurea/polyurethane systems are sprayed with high-pressure plural component spray equipment and can also be sprayed with a cartridge gun for repairs. The thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.

KEY BENEFITS

• Complies with NSF/ANSI 61 Section 5 potable water standard
• Rapid cure times for quick return to service
• High build cross sections
• Robust application window with ability to spray at low temperatures and high humidity
• High physical properties including tensile, tear, and compressive properties
• Excellent leveling properties
• Excellent impact resistance
• Excellent chemical resistance and corrosion resistance
• Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
• 100% solids, zero VOCs, no solvents

TYPICAL APPLICATIONS

• Often used to repair aging and badly damaged gas, oil, sewer and water/wastewater tanks and pipelines
• Creates self-supporting polyurea pipe with a pipe
• Maintenance coating in immersion conditions
• Concrete waterproofing
• Geotextile fabric lining
• Holding tanks
• Containment areas
• Ponds and reservoirs
• Storage tanks
• Aerators, digesters, sludge bins & wet wells