DESCRIPTION

Rhino™ 9700 Novolac is a high quality Bis-F epoxy novolac coating and lining system which has superior chemical and abrasion resistance versus Bis-A type epoxy resins. This tightly crosslinked epoxy system cures in the presence of moisture and humidity with excellent mechanical properties.

Rhino 9700 mixes using the industry standard, 2:1 by volume ratio. Having low odor, Rhino 9700 contains no solvents and is 100% solids that assures ease of application. Rhino 9700 Novolac viscosity is well suited for vertical applications.

FEATURES & BENEFITS

  • Well suited for vertical applications
  • Superior chemical and abrasion resistance
  • Excellent bonding
  • Highly resistant to cratering or blush
  • Dries to a high gloss
  • Low odor
  • 100% solids, no solvents
  • Cures in the presence of moisture and humidity with excellent mechanical properties
  • Recommended for vertical applications where increased resistance to acids, bases and solvents is desired
  • Great coating in areas were high concentrations of chemicals are used
  • Primary and secondary containment
  • Chemical tanks and disposal pits or tunnels
Solids by Volume 100%
Volatile Organic Content (VOC) 0 lbs / gal
Mixing ratio 2:1 by volume
Viscosity Thixotropic (for vertical surfaces)
Pot Life (neat coating) 25-30 minutes
Application Temperature 55°F minimum, 100°F maximum
Maximum Re-coat Time 24 hrs.
Dry To Touch 6-8 hrs.
Light Traffic 14-16 hrs
Return To Service 24-36-hrs.
Full Cure 7 Days
Hardness (Shore D) 86+5
Tensile Strength (psi) 7000-8000 ASTM D-638
Tensile Elongation (%) 3.2 ASTM D-638
Flexural Strength 13000 – 13800 ASTM D-790
Compressive Strength (psi) 12000 – 14000 ASTM D-695
HDT (F) 140 ASTM D-648
Water Absorp. (% gain) 24 hrs <1
Bond Strength (psi) to concrete >400, w/100% failure

A thorough and complete mixing is critical. First mix each component separately. Proportion each component at the ratio of 2 parts A (resin) to 1 part B (hardener) by volume or if using 1-gallon kits, pour all of Part B (hardener) into Part A (resin). Mix for 3 – 5 minutes, scraping the mixing container sides and bottom regularly. Mix no more material than may be applied in 20 minutes.

Apply mixed product by brush or roller at the rate of 15 mils (approx. 100 sq ft per gallon). Once the first coat has tacked, but not fully cured, an additional 15 mil coating may be applied. Allow the material to cure 48 hours minimum before exposure to any chemicals (product will continue to cure for 7 days to full properties).

Reagent % Weight gain (loss)
Xylene 0.0
1,1,1 Trichloroethane 0.0
EB (Ethylene Glycol Monobutyl Ether) 2.4
Water (deionized) 1.2
10% Sodium Hydroxide 0.0
10% Sulfide Acid 0.0
10% Hydrochloric Acid 0.1
10% Acetic Acid 5.4
Synthetic Gasohol 0.0
JP-4, JP-5, JP-7, JP-8 0.0
Reagent % Weight gain (loss)
Toluene 2.3
MEK 2.3
Ethyl Alcohol 6.9
5% Detergent Solution 0.0
50% Sodium Hydroxide (0.2)
70% Sulfuric Acid 0.2
5% Acetic Acid 2.6
Skydrol (0.03)
Mogas, Diesel 0.0
Diethylene Glycol Monomethyl Ether 0.0
0%
SOLIDS BY VOLUME
0
MAX RE-COAT TIME AT 77°F (HRS)
0
DRY TO TOUCH AT 77°F (HRS)
0
LIGHT TRAFFIC AT 77°F (HRS)

APPLICATION PROCESS

 RHINOPRO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603