DESCRIPTION

RhinoPro™ Cartridge Guns are dual component pneumatic applicators specially designed for RhinoPak cartridges. One RhinoPak™ 1500 ml cartridge sprayed at 1/8″ (125 mils) can cover a 4 sq. ft. area.

RhinoPaks are cartridges used with the RhinoPro™ Cartridge Gun 1500. Each is an elastomeric hybrid protective lining system packaged in dual 750 ml cartridges which is great for small jobs, hard-to-reach places and repairs

  • RhinoPak 90A has a hardness rating of 90 Shore A similar to the TuffGrip products.
  • RhinoPak 55D has a hardness rating similar to the HardLine, Extreme and Hybrid products.
  • RhinoPak 60D has a hardness rating similar to the DuraSpray product.
  • RhinoPak 70D has a hardness rating similar to the Hi-Chem product.
  • RhinoPak SM has a hardness similar to SolarMax.

KEY BENEFITS

  • Complies with NSF/ANSI 61 Section 5 potable water standard
  • Rapid cure times for quick return to service
  • High build cross sections
  • Robust application window with ability to spray at low temperatures and high humidity
  • High physical properties including tensile, tear, and compressive properties
  • Excellent leveling properties
  • Excellent impact resistance
  • Excellent chemical resistance and corrosion resistance
  • Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
  • 100% solids, zero VOCs, no solvents

TYPICAL APPLICATIONS

  • Often used to repair aging and badly damaged gas, oil, sewer and water/wastewater tanks and pipelines
  • Creates self-supporting polyurea pipe with a pipe
  • Maintenance coating in immersion conditions
  • Concrete waterproofing
  • Geotextile fabric lining
  • Holding tanks
  • Containment areas
  • Ponds and reservoirs
  • Storage tanks
  • Aerators, digesters, sludge bins & wet wells

GRACO – HIGH PRODUCTION EQUIPMENT

R2 H-50

________________________________________________

Output: 52 lb/min (23.6 kg/min)
Output per Cycle: 0.074 gal (0.28 l)
Maximum Operating Pressure: 2000 psi (138 bar)
Primary Heaters: 20.4 kw

R2 H-40

________________________________________________

Output: 45 lb/min (20.4 kg/min)
Output per Cycle: 0.063 gal (0.24 l)
Maximum Operating Pressure: 2000 psi (138 bar)
Primary Heaters: 20.4 kw / 15.3 kw

Elite models available. Includes similiar standard model specifications plus Graco InSite Remote Reporting Technology, Inlet Pressure and Temperature Sensor (interfaces with Graco InSite) and Xtreme-Wrap Scuff Guard on heated hoses.

GRACO – MID PRODUCTION EQUIPMENT

 

R2 H-30

________________________________________________

Output 28 lb/min (12.3 kg/min)
Output per Cycle 0.074 gal (0.28 l)
Maximum Operating Pressure 2000 psi (138 bar)
Primary Heaters 15.3 kw / 10.2 kw

R2 E-30

________________________________________________

Output 30 lb/min (13.6 kg/min)
Output per Cycle 0.0272 gal (0.1034 l)
Maximum Operating Pressure 2000 psi (138 bar)
Primary Heaters 15.3 kw / 10.2 kw

 

Elite models available. Includes similiar standard model specifications plus Graco InSite Remote Reporting Technology, Inlet Pressure and Temperature Sensor (interfaces with Graco InSite) and Xtreme-Wrap Scuff Guard on heated hoses.

Open Cell Advantage

Interlocking air bubbles expand over 100 times their original size in about 4 seconds to create a soft, spongy, insulating barrier.  Open cell spray foam insulation costs less per job and per R-value measurement allowing you to use much less material to cover more ground.

Open-Cell Content

98%

View Our Other Rhino Linings® Industrial Products

Spray Machines

Construction Equipment

Oil & Gas

0
CURE TIME (SECONDS)
0
RHINO EMPLOYEES
0
COUNTRIES SERVED
0%
CUSTOMER SATISFACTION

APPLICATION PROCESS

CREATING ART WITH RHINO

SPRAY FOAM ROOFING

EPOXY FLOOR COATING

Find out how our product solutions can help expand your business: 800-422-2603